Configuration; Using The Web Configuration Utility - D-Link DCS-5010L User Manual

Pan & tilt day/night network camera

Table of Contents

Section 4 - Configuration

After completing the Camera Setup Wizard, you are ready to use your camera. The camera's built-in Web configuration utility

is designed to allow you to easily access and configure your DCS-5010L. There are two ways in which you can access your

camera's Web configuration interface:

• Log in to your mydlink account, click on the Settings tab, and click on Advanced Settings to access your camera's Web

configuration utility.

• You can also access the interface locally by entering the IP address of your camera into a Web browser, such as Internet

Explorer. To log in, use the User name admin and the Password you created in the Setup Wizard. (If you did not create a

password, leave the password field blank.) After entering your password, click OK.

Note: If you are directly connecting your camera to your PC, or if you are using the camera on a closed network, the default IP address

is 192.168.0.20. If the camera is connected to a router or network, a different IP address may have been assigned.

D-Link DCS-5010L User Manual

Configuration

DCS-5010L

Table of Contents