Video Input Source Selection - Sanyo PLC-XF70 Owner's Manual

Video Input Source Selection

Menu Operation
When Selecting the INPUT 1 with DVI/D-sub 15 terminals
When connecting to video equipment, select the type of
Video source in the Source Select Menu.
RGB (Scart)
When scart video equipment is connected to the INPUT 1
(ANALOG) terminal, select RGB (Scart).
RGB (AV HDCP)
If the HDCP-compatible signal source is connected to the
INPUT 1 (DIGITAL) terminal, select RGB (AV HDCP).
When Selecting the INPUT  with 5-BNC/Video/S-Video terminals
When connecting to video equipment, select the type of
Video source in the Source Select Menu.
y, Pb/Cb, Pr/Cr
When the video input signal is connected to the Y-Pb/Cb-
Pr/Cr jacks, select Y, Pb/Cb, Pr/Cr.
Video
When the video input signal is connected to the VIDEO
jack, select Video.
S-Video
When the video input signal is connected to the S-VIDEO
jack, select S-Video.
INPUT MENU
Input 1
INPUT MENU
Input 
✔ Note:
• HDCP (High-bandwidth Digital Content Protection) is a
system for protecting digital entertainment content which is
delivered by DVI (Digital Visual Interface) from being copied.
The specification of HDCP is decided and controlled by
Digital Content Protection, LLC. Should the specification be
changed, this projector may not display the digital content
protected by HDCP .
• When a slot is empty, the input is displayed in grayout.
Input Selection
Input Menu icon
Move the pointer (red arrow) to Input
1 and press the SELECT button.
Source Select Menu
Move the pointer (red
arrow) to RGB (Scart) or
RGB (AV HDCP) and press
the SELECT button.
Input Menu icon
Move the pointer (red arrow) to Input
2 and press the SELECT button.
Source Select Menu
Move the pointer (red
arrow) to Y, Pb/Cb, Pr/Cr ,
Video, or S-video and press
the SELECT button.