Technical Data - Electrolux EHF6232FOK User Manual

Problem
and a number come on.
You can hear a constant beep
noise.
comes on.
8.2 If you cannot find a solution...
If you cannot find a solution to the problem
yourself, contact your dealer or an
Authorised Service Centre. Give the data
from the rating plate. Give also three digit
letter code for the glass ceramic (it is in the
corner of the glass surface) and an error

9. TECHNICAL DATA

9.1 Rating plate
Model EHF6232FOK
Typ 60 HAD 20 AO
Ser.Nr. .................
ELECTROLUX
9.2 Cooking zones specification
Cooking zone
Left front
Left rear
Right front
For optimal cooking results use cookware no
larger than the diameter of the cooking zone.
56 ENGLISH
Possible cause
There is an error in the hob.
The electrical connection is incor‐
rect.
The second phase of the power sup‐
ply is missing.
PNC 949 492 225 02
220 - 240 V 50 - 60 Hz
Made in: Romania
5.7 kW
Nominal Power (Max heat set‐
ting) [W]
1800
1200
1050 / 1950 / 2700
Remedy
Deactivate the hob and activate it
again after 30 seconds. If
on again, disconnect the hob from the
electrical supply. After 30 seconds,
connect the hob again. If the problem
continues, speak to an Authorised
Service Centre.
Disconnect the hob from the electrical
supply. Ask a qualified electrician to
check the installation.
Check if the hob is correctly connected
to the electrical supply. Remove the
fuse, wait one minute, and insert the
fuse again.
message that comes on. Make sure, you
operated the hob correctly. If not the
servicing by a service technician or dealer
will not be free of charge, also during the
warranty period. The information about
guarantee period and Authorised Service
Centres are in the guarantee booklet.
Cooking zone diameter [mm]
180
145
145 / 210 / 270
comes