ThinkStation LED cable and holder
Prerequisite
Before you start, read Generic Safety and Compliance Notices, and print the following instructions.
For access, do the following:
1. Remove the side panel. See "Side panel" on page 61.
2. Remove the CPU duct. See "CPU duct" on page 66.
3. Remove the front CPU fan. See "Front CPU fan" on page 72.
4. Remove the hard disk driver and lower PCI-Express fan. See "Hard disk drive and lower PCI-Express
fan" on page 75.
Removal steps
80
ThinkStation P7 Hardware Maintenance Manual