Table of Contents
Advertisement
Screw (quantity)
Peek (4)
CPU and its carrier
Prerequisite
Before you start, read Generic Safety and Compliance Notices, and print the following instructions.
CAUTION:
Avoid contact with hot components inside the computer. During operation, some components
become hot enough to burn the skin. Before you open the computer cover, turn off the computer,
disconnect power, and wait approximately 10 minutes for the components to cool.
Notes:
• Ensure that you install the correct type of CPU option your computer supports.
• Your CPU and CPU carrier might look slightly different from the illustrations in this topic.
For access, do the following:
1. Remove the side panel. See "Side panel" on page 61.
2. Remove the CPU duct. See "CPU duct" on page 66.
3. Remove the CPU heatsink. See "CPU heatsink" on page 97.
Removal steps
Note: Touch only the edges of the CPU. Do not touch the gold contacts on the bottom.
98
ThinkStation P7 Hardware Maintenance Manual
Color
Off white
Torque
10 ± 1 lb/in
Advertisement
Table of Contents
