Table of Contents
Advertisement
• Do not apply pressure to the internal storage drive.
• Do not make the internal storage drive subject to physical shocks or vibration. Put the internal storage
drive on a soft material, such as cloth, to absorb physical shocks.
For access, do the following:
1. Remove the side panel. See "Side panel" on page 61.
2. Remove the following solid-state drive module if any:
• "Solid-state drive bracket in internal storage drive bay" on page 68
• "Vertical M.2 solid-state drive module" on page 69.
Replacement procedures
.
Chapter 7
Hardware removal and installation
71
Advertisement
Table of Contents
