Advertisement
Standard Pairing Feature
Note
Bluetooth tones, Bluetooth menu and
preprogrammed buttons must be
preprogrammed by a qualified radio
technician. Check with your dealer or system
administrator for more information.
Once a COTS headset is paired to your radio,
it is always connected. Therefore the battery
life of the accessory is aligned with the Talk
time power consumption, not the Standby time
consumption.
The Bluetooth Standard Pairing feature enables your
Bluetooth enabled radio to search for other Bluetooth
enabled and discoverable device. Once the device is
discovered, you can initiate your radio to send a
pairing request to pair with the device.
This feature also enables your Bluetooth enabled
radio to be visible to another Bluetooth enabled
device and receive request to pair from other device.
The Standard Pairing feature supports pairing
Authentication Personal Pairing Number or PIN which
ensure your radio recognizes the correct device to
pair. The PIN must be exchanged with the radio or
144
English
the device before the pairing completes. Your radio
prompts for the Authentication PIN when needed.
Refer to your device's manual for details about the
Bluetooth Authentication PIN of your device if
needed.
Searching and Pairing the Bluetooth Device
Ensure the Bluetooth on your device is turned on and
is set to Discoverable in order to enable your radio to
detect your device in Bluetooth.
Bluetooth Search in Bluetooth Standard Pairing
method is used to scan for other Bluetooth devices
nearby. It is set to off by default.
1 Perform one of the following actions:
Press the preprogrammed Bluetooth Search
•
button .
•
or to BT. Press the Menu Select button
directly below BT to access the Bluetooth
feature screen.
or
and press the Menu Select button directly
below On.
If successful, the display shows Searching for
BT devices followed by the names of Bluetooth
devices found, if any. When the search timer
to Search Devices
Advertisement
