Table of Contents
Advertisement
6. When the time is set, it will begin to count down
immediately. The display will show the remaining
time and the timer indicator flashes for 5 seconds.
NOTE: The red dot next to power level indicator
will illuminate indicating that zone is selected.
7. When cooking timer expires, the corresponding
cooking zone will be switch off automatically.
Other cooking zone will keep operating if they are turned on previously.
If the timer is set on more than one zone:
1. When you set the time for several cooking zones simultaneously, decimal dots
of the relevant cooking zones are on. The minute display shows the min. timer.
The dot of the corresponding zone flashes.
(set to 15 minutes)
2. Once the countdown timer expires, the corresponding zone will switch off.
Then it will show the new min. timer and the dot of corresponding zone will
flash.
• Touch the heating zone selection control, the corresponding timer will be shown
in the timer indicator.
(set to 45 minutes)
EN-21
Advertisement
Table of Contents
