Removing the speakers
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
Remove the
base
Procedure
1
Disconnect the speaker cable from the system board.
2
Note the position of the rubber grommets before lifting the speakers.
3
Lift the right speaker by releasing the rubber grommets from the slots on the
palm-rest assembly.
4
Lift the status-light board from the slot on the palm-rest assembly.
5
Note the cable routing and remove the speaker cable from the routing guides on
the palm-rest assembly.
computer. After working inside your computer, follow
After working inside your
cover.
computer. For more safety best
www.dell.com/
Before
43