Removing the base cover
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
1
Close the display and turn the computer over.
2
Loosen the six captive screws that secure the base cover to the palm-rest
assembly.
3
Remove the 4 screws (M2.5x5) that secure the base cover to the palm-rest
assembly.
computer. After working inside your computer, follow
After working inside your
computer. For more safety best
www.dell.com/
Before
15