Table of Contents
Advertisement
Super X10DSC-TP4S Motherboard User's Manual
Port 0 ~ Port 3 sSATA Device Type
Use this item to specify if the sSATA port specified by the user should be con-
nected to a Solid State drive or a Hard Disk Drive. The options are Hard Disk
Drive and Solid State Drive.
Server ME (Management Engine) Configuration
This feature displays the following system ME configuration settings.
•
General ME Configuration
•
Operational Firmware Version
•
ME Firmware Type
•
Recovery Firmware Version
•
ME Firmware Features
•
ME Firmware Status #1
•
ME Firmware Status #2
•
Current State
•
Error Code
PCIe/PCI/PnP Configuration
PCI Latency Timer
Use this item to configure the PCI latency timer for a device installed on a PCI bus.
Select 32 to set the PCI latency timer to 32 PCI clock cycles. The options are 32,
64, 96, 128, 160, 192, 224 and 248 (PCI Bus Clocks).
PERR# Generation
Select Enabled for the BIOS to generate a PERR (PCI/PCI-E Parity Error) number
The options are Enabled and Disabled.
SERR# Generation
Select Enabled for the BIOS to generate a SERR (System Error) number The op-
tions are Enabled and Disabled.
4-24
Advertisement
Table of Contents
