Serial/Com Ports; Video Connection - Supermicro X10DSC-TP4S User Manual

Serial/COM Ports

Two serial/COM connections are located on the motherboard. COM1 is located on
the I/O backpanel, and COM2 header is located next to the Aspeed AST2400 BMC
chip on the motherboard. Refer to the table below for COM2 pin definitions. Also,
see the layout below for COM1 and COM2 locations.

Video Connection

A Video (VGA) port is located next to COM Port 1 on the I/O back panel. Refer to
the board layout below for the location.
2
IPMI CODE
SAN MAC
NIC MAC
SAS_MAC CODE
X10DSC-TP4S
BAR CODE
SAS_MAC CODE
Rev.1.00
COM Port 2 (COM2)
Pin Definitions
Pin#
1
2
3
4
BIOS
LICENSE
2-17
Header
Definition
RX
Ground
TX
Vref. 1.8V
3
Chapter 2: Installation
1. COM1
2. COM2
3. VGA
1