Entering Text - Sanyo Katana Eclipse X User Manual

Using Speed Dialing
You can store up to 98 numbers in your phone's speed
dial memory to make contacting friends and family as
easy as pressing a button or two. With this feature, you
can dial speed dial entries using one keypress for
locations 2–9 or two keypresses for locations 10–99.
To use One-Touch Dialing for speed dial locations 2–9:
Press and hold the appropriate key for
approximately two seconds. The display confirms
that the number has been dialed when it shows
"Connecting...".
To use Two-Touch Dialing for speed dial locations 10–99:
1.
Press the first digit.
2.
Press and hold the second digit for approximately
two seconds. The display confirms that the number
has been dialed when it shows "Connecting...".
Note Speed dialing may not available when you are
roaming; when you are roaming off the Sprint
National Network, you must always dial using
eleven digits (1 + area code + number).

Entering Text

SelectingText Input Options
Your phone provides convenient ways to enter words,
letters, punctuation, and numbers whenever you are
prompted to enter text (for example, when adding a
Contacts entry or when using Sprint Mail and SMS Text
Messaging).
1.
From a screen where you can enter text, press
(right softkey) to change the text input
Text Mode
mode.
2.
Select one of the following options:
to enter text using a predictive text system
T9 Word
that reduces the number of keypresses required
while entering a word. Press the navigation key
right or left to toggle between T9 Word and
Alphabet mode. (See page 31.)
Alphabet to enter characters by using the Alphabet
mode. Press the navigation key right or left to
toggle between T9 Word and Alphabet mode.
(See page 32.)
Section 2A. Phone Basics 29