Setting Up Screen Call - Sanyo Katana Eclipse X User Manual

Setting Up Screen Call

You can screen incoming calls by using a recorded
announcement, either a prerecorded one or one that
you record. You can also record the caller's message.
Activating Screen Call
To start Screen Call when you have an incoming call:
When the phone rings or vibrates, press
(right softkey)
> Screen Call
Tip While the caller's message is being recorded, press
TALK to answer the call, or press END to stop
recording and disconnect the call.
To screen calls automatically:
1. Select and press
Screen Call > Auto
2.
Select .
On
3. Set the answer delay.
4.
Press (left softkey).
OK
(The icon is displayed on the screen.)
100 Section 2I. Voice Services
Options
.
> Tools > Voice Memo >
.
Selecting an Announcement for
Screen Call
1.
Select and press
Screen Call > Announcement
2.
Select
Pre-Recorded
Recording Your Name for a Prerecorded
Announcement
You can use a prerecorded announcement with or
without your name. If you record your name, your phone
adds it to the prerecorded announcement that you are
not available to answer calls.
1.
Select and press
Screen Call > Announcement
2.
Highlight
Pre-Recorded
.
Record Name
3.
Press to start the first recording. (Press
stop recording. The maximum recording time is 12
seconds.)
4. After the first recording, press
second recording.
5.
Press to stop recording.
> Tools > Voice Memo >
.
or .
Custom
> Tools > Voice Memo >
.
and press (right softkey)
Edit
again to start the
>
to