Answering Calls - Sanyo Juno User Manual

Answering Calls

1.
Make sure your phone is on. (If your phone is off,
incoming calls go to voicemail.)
2. Press to answer an incoming call.
(Depending on your settings, you may also answer
incoming calls by pressing other keys. See "Call
Answer Mode" on page 46.)
Your phone notifies you of incoming calls in the
following ways:
The phone rings or vibrates.
The backlight illuminates.
The screen displays an incoming call message.
If the incoming call is from a number stored in your
Contacts, the entry's name is displayed. The caller's
phone number may also be displayed, if available.
When receiving a call, press one of the following keys for
other actions:
to answer a call in speaker mode.
IGNORE WITH TEXT
and send a text message to the caller.
20 2A. Phone Basics
(right softkey) to ignore the call
Note IGNORE WITH TEXT may not be displayed when
calls are from entries identified as No Caller ID,
Private, or Unavailable ID .
to ignore a call.
(left softkey) to mute the ringer and
SILENCE
vibration.
Tip Pressing the BACK key or any of the side buttons
can also mute the ringer and vibration.
Note When your phone is off, all calls go directly to
voicemail.