Volvo S90 2019 Owner's Manual page 656

MAINTENANCE AND SERVICE
||
wipers are not on. Service mode is activated/
deactivated via the function view in the centre
display:
Press the
Position
indicator in the button illumi-
nates when service mode is
activated. When activated,
the wipers move to the serv-
ice position. To deactivate the
Wiper Service Position
service mode, press
again. The light indicator in the button extin-
guishes when service mode is deactivated.
The wiper blades also exit the service position
if:
Windscreen wiping is activated.
•
Windscreen washing is activated.
•
The rain sensor is activated.
•
The car is driven away.
•
IMPORTANT
If the wiper arms in service position have
been folded up from the windscreen, they
must be folded back down onto the wind-
screen before the activation of wiping,
washing or the rain sensor, as well as
before driving. This is to avoid scraping the
paint on the bonnet.
654
Related information
Using the rain sensor (p. 180)
•
Using windscreen and headlamp washers
•
(p. 182)
Wiper Service
button. The light
Using the rain sensor's memory function
•
(p. 181)
Filling washer fluid (p. 654)
•
Replacing windscreen wiper blades
•
(p. 652)
Using windscreen wipers (p. 179)
•
Wiper blades and washer fluid (p. 179)
•
Filling washer fluid
Washer fluid is used for cleaning the head-
lamps and windscreen. Washer fluid with
antifreeze must be used when the tempera-
ture is under the freezing point.
Washer fluid is filled into the reservoir with the
blue cap. The reservoir is used for both wind-
screen washer and headlamp washers*
NOTE
When approx. 1 litre (1 qt) of washer fluid
remains in the reservoir, the message
Washer fluid Level low, refill
the driver display, together with the
symbol.
Prescribed grade: Washer fluid recom-
mended by Volvo – with frost protection dur-
* Option/accessory.
is shown in