Selecting A Stored Station; Improving Radio Reception - Samsung MM-N4 Instruction Manual

Searching for and Storing the Radio Stations(continued)
6
Adjust the volume by:
Pressing VOLUME
or
Pressing the VOL. + or - buttons on the remote control
7
Select the stereo or mono mode by pressing Mono/ST.
Result: The MONO indicator is displayed when selected.
8
If you do not want to store the radio station found, revert to Step
4 and search for another station.
Otherwise:
a Press Program/Set.
Result: The program number and PROGRAM are displayed
for a few seconds.
b Press TUNING and
between 1 and 15.
c Press Program/Set to store the radio station.
Result: PROGRAM is no longer displayed and the station is
stored.
9
To store any other radio frequencies required, repeat Steps 3 to 8.
The PROGRAM function can be used to assign a new
station to an existing program number.
Power
EQ Preset Sound
Sleep CD Repeat Mono/ST.
TAPE
6
VOL. VOL.
Tuning
Mode
8
CD
CD
VOL. VOL.
6
Band
TUNER TAPE
On/Standby
8
Mute
Phones
RDS
Pty Display
Power Sound
or on the front panel
to assign a program number
Program
/Set AUX
8
TUNER
7
Band
CD
8
CD
CD
CD AUX
REC/Pause
Volume
8
Repeat(A<->B)
6
CD Synchro

Selecting a Stored Station

You can listen to a stored radio station as follows:
1
Switch the system on by pressing On/Standby.
2
Select the TUNER function by pressing TUNER/Band on the
front panel.
3
Select the required frequency band by pressing TUNER on the
remote control or TUNER/Band again on the front panel.
4
Select the radio station as follows.
To listen to ...
A stored station
Another station
Press Tuning Mode again to exit the stored station
selection function.
y
On/Standby
Timer Timer/
On/Off Clock
1
Power Program
EQ Preset Sound /Set AUX
2 3
Sleep CD Repeat Mono/ST. TUNER
Band
TAPE

Improving Radio Reception

You can improve the quality of radio reception by:
Rotating the FM or AM(MW) aerial
Testing the positions of the FM and AM(MW) aerials
before fixing them permanently
If reception from a specific FM radio station is poor, press
Mono/ST to switch from stereo mode to mono. The quality
of the sound will be improved.
Power
EQ Preset Sound
Sleep CD Repeat Mono/ST.
Press ...
a Press the Tuning Mode button
until "PRESET" is displayed.
b TUNING and to select the
required program.
TUNING and until the
required frequency is displayed.
VOL.
4
Tuning Tuning
Mode Mode
CD CD CD CD
4
VOL.
Program
/Set AUX
TUNER
Band
TAPE
CD
VOL.
GB
4
9