Table of Contents
Advertisement
Timer Function
GB
The timer enables you to switch the system on or off at specific times.
Example: You wish to wake up to music every morning.
If you no longer want the system to be switched on or off
automatically, you must cancel the timer.
Before setting the timer, check that the current time is correct.
For each step, you have a few seconds to set the required
options. If you exceed this time, you must start again.
1
Switch the system on by pressing Standby/On (
).
2
Press TIMER/CLOCK until
TIMER is displayed.
3
Press PROGRAM/SET.
Result:ON TIME is displayed for a few seconds, followed by any switch-
on time already set; you can set the timer switch-on time.
4
Set the timer switch-on time.
a Set the hour by pressing
and
.
b Press PROGRAM/SET.
Result: The minutes flash.
c Set the minutes by pressing
and
.
d Press PROGRAM/SET.
Result: OFF TIME is displayed for a few seconds, followed by any
switch-off time already set; you can now set the timer switch-off
time.
5
Set the timer switch-off time.
a Set the hour by pressing
and
.
b Press PROGRAM/SET.
Result: The minutes flash.
c Set the minutes by pressing
and
.
d Press PROGRAM/SET.
Result: VOL 10 is displayed, where 10 corresponds to the volume already
set.
6
Press
and
to adjust the volume level and press
PROGRAM/SET.
Result:The source to be selected is displayed.
7
Press
and
to select the source to be played when the system
switches on.
If you select...
You must also...
TAPE (cassette) ........................
•
Insert a recorded cassette in the deck.
TUNER (radio) ..........................
•
Select the FM or AM (MW/LW) frequency
band by pressing
and
Press PROGRAM/SET.
•
Select a preset station by pressing
•
and
.
CD (compact disc) ....................... Load a compact disc.
8
Press PROGRAM/SET to confirm the timer.
9
Press Standby/On to set the system to standby mode.
Result:
is displayed on the top right of the time, indicating that the timer has
been set. The system will switch on and off automatically at the required
times.
If the timer switch on and off times are identical, the word ERROR
is displayed.
You can use
/
button on the front panel instead of
/
button on the remote control in step 4,5,6,7.
22
1,9
2
4,5,6,7
4,5,6,7
3,4,5,6,7,8
Cancelling the Timer
After having set the timer, it will start automatically as shown by
the timer indication on the display. If you no longer wish to use
the timer, you must cancel it.
You can stop the timer at any time (system on or in standby mode).
To...
Press TIMER ON/OFF...
Cancel the timer........................... Once.
Result:
is no longer displayed.
.
Restart the timer.......................... Twice.
Result:
is displayed again.
Power sound function
This machine is equipped with the function of POWER SOUND,
which amplifies bass treble output to twice as much for powerful
surround-sound.
1
Press the POWER SOUND button on the front panel.
Result:
P.SOUND is displayed for a few seconds.
A more powerful resonant sound is diffused.
2
To cancel this function, press POWER SOUND again.
Result:
OFF is displayed for a few seconds.
EQ /S.BASS
(Super Bass) Function
Your Micro Component system has a bass amplification function
and equipped with a preset equaliser that allows you to
choose the most appropriate balance between treble and bass
frequencies , according to the type of music you are listening
to.That is called EQ/S.BASS.
This function makes the sound more powerful and real.
Press EQ/S. BASS on the front panel or EQ/S. BASS on the remote
control until the required option is selected.
To obtain a...
Select...
Normal balance (linear)............................................PASS
Balance suitable for pop music............................POP
Balance suitable for rock music ..........................ROCK
Balance suitable for classic music.......................CLASSIC
Balance suitable for jazz music...........................JAZZ
Balance suitable for s-bass music.......................S-BASS
23
Advertisement
Table of Contents
