Download Print this page

Husqvarna 322iHD60 Operator's Manual page 9

Advertisement

7. Release the power trigger lockout and make sure
that the return spring of the power trigger lockout
operates correctly. The blade must stop in less than
1 second.
To do a check of the hand guard
The hand guard prevents hands from accidental contact
with the blades.
1. Stop the product.
2. Remove the battery.
3. Check that the hand guard is attached correctly.
4. Examine the hand guard for damages.
To do a check of the blades and blade guards
1. Stop the product.
2. Remove the battery.
3. Put on protective gloves.
4. Make sure that the blades (A) and blade guard (B)
are not damaged or twisted. Replace the blades and
blade guards if they are damaged or bent.
A
B
Battery safety
WARNING:
instructions that follow before you use the
product.
Do not use a battery pack or tool that is damaged or
modified. Dagaged or modified batteries may exhibit
unpredictable behaviour resulting in fire, explosion,
or risk of injury.
Do not expose battery pack or tool to fire
or excessive temperature. Exposure to fire or
temperature above 130°C may cause explosion.
Note:
The temperature above 130°C can be
replaced by the temperature 265°F.
Follow all charging instructions and do not charge
the battery pack or tool outside the temperature rage
specified in the instructions. Charging improperly or
at temperatures outside the specified range may
damage the battery and increse the risk of fire.
1865 - 002 - 14.06.2023
Read the warning
Only use the BLi battery. Refer to
on page 17 . The battery is software encrypted.
Use the BLi battery that is rechargable as a power
supply for the related Husqvarna products only. To
prevent injury, do not use the battery as a power
supply for other devices.
Risk of electrical shock. Do not connect the battery
terminals to keys, coins, screws or other metal. This
can cause a short circuit of the battery.
Do not use non-rechargeable batteries.
Do not put objects into the air slots of the battery.
Keep the battery away from sunlight, heat or open
flame. The battery can cause burns and/or chemical
burns.
Keep the battery away from rain and wet conditions.
Keep the battery away from microwaves and high
pressure.
Do not try to disassemble or break the battery.
If the battery leaks, do not let the liquid touch your
body or eyes. If you have touched the liquid, clean
the area with a large quantity of water and soap, and
get medical aid. If you get liquid in your eyes, do not
rub but flush with water for a minimum of 15 minutes
and get medical aid.
Use the battery in temperatures between -10 °C (14
°F) and 40 °C (114 °F).
Do not clean the battery or the battery charger with
To clean the product, the battery and
water. Refer to
the battery charger on page 13 .
Do not use a defective or damaged battery.
Keep batteries in storage away from metal objects
such as nails, screws or jewelry.
Keep the battery away from children.
Battery charger safety
WARNING:
instructions that follow before you use the
product.
Do not use a battery pack or tool that is damaged or
modified. Dagaged or modified batteries may exhibit
unpredictable behaviour resulting in fire, explosion,
or risk of injury.
Do not expose battery pack or tool to fire
or excessive temperature. Exposure to fire or
temperature above 130°C may cause explosion.
Note:
The temperature above 130°C can be
replaced by the temperature 265°F.
Follow all charging instructions and do not charge
the battery pack or tool outside the temperature rage
specified in the instructions. Charging improperly or
at temperatures outside the specified range may
damage the battery and increse the risk of fire.
Risk of electrical shock or short circuit if the safety
instructions are not obeyed.
Approved batteries
Read the warning
9

Advertisement

loading