Table of Contents
Advertisement
1.5
System memory
1.5.1
Overview
The motherboard comes with four Double Data Rate 2 (DDR2) Dual Inline Memory
Modules (DIMM) sockets.
A DDR2 module has the same physical dimensions as a DDR DIMM but has a
240-pin footprint compared to the 184-pin DDR DIMM. DDR2 DIMMs are notched
differently to prevent installation on a DDR DIMM socket.
The figure illustrates the location of the DDR2 DIMM sockets:
P5LD2-VM/CR
240-pin DDR2 DIMM sockets
Channel
Channel A
Channel B
1.5.2
Memory configurations
You may install 256 MB, 512 MB and 1 GB unbuffered non-ECC DDR2 DIMMs into
the DIMM sockets.
•
For dual-channel configuration, the total size of memory module(s) installed
per channel must be the same (DIMM_A1 + DIMM_A2 = DIMM_B1 +
DIMM_B2).
•
Always install DIMMs with the same CAS latency. For optimum
compatibility, it is recommended that you obtain memory modules from the
same vendor. Refer to the DDR2 Qualified Vendors List on the next page
for details.
•
Due to chipset resource allocation, the system may detect less than 4 GB
system memory when you installed four 1 GB DDR2 memory modules.
•
This motherboard does not support memory modules made up of 128 Mb
chips or double sided x16 memory modules.
ASUS P5LD2-VM/CR
Sockets
DIMM_A1 and DIMM_A2
DIMM_B1 and DIMM_B2
1-1
Advertisement
Table of Contents
