Summary of Contents for Curtis Mathes CMV42002
- Page 1 01925A CMV62002 7/27/02 5:01 PM Page 1 Video Cassette Recorder Owner’s Manual CMV42002 CMV62002...
-
Page 2: Safety Instructions
01925A CMV62002 7/27/02 5:01 PM Safety Instructions RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICE- ABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Note to CATV system installer: This reminder is provided to call CATV system installer's atten- tion to Article 820-40 of the National Electrical Code (Section 54 of Canadian Electrical Code, Part I) that provides guidelines for proper grounding and, in particular, specifies that the cable... - Page 3 01925A CMV62002 7/27/02 5:01 PM Safety Instructions Ventilation-Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface.
-
Page 4: Table Of Contents
VCR Functions ........ -
Page 5: Your New Vcr
Press to change channels or press to move a cursor up or down on the menu screen. LINE IN Input signal from another VCR or camcorder. (Model CMV42002 has only one AUDIO LINE IN jack.) TIMER Indicator Timer Recording is set. -
Page 6: Remote Control
01925A CMV62002 7/27/02 5:01 PM Your New VCR Remote Control POWER Press to turn your VCR and TV on and off. CLEAR Press to set counter to zero or to clear timer record programs. SHUTTLE Press to change speed during playback. -
Page 7: Vcr Setup
7/27/02 5:01 PM Rear Panel Use the jacks on the rear panel to connect the VCR to other components and signals, including: VCRs, TVs, stereo equipment, digital video components, antenna and cable signals. Note: CMV42002 has one Audio out on the rear panel. - Page 8 • While the VCR is turned off or the “VCR” indicator is not lit in the VCR display, set TV channel to the output channel of the cable box. Premium Cable TV Connection 2 This set-up will enable you to: - Record an unscrambled channel.
-
Page 9: Plug And Play
VCR. Plug and Play The VCR’s clock and tuner channels are set automatically when the VCR is plugged into the AC outlet. If you use a cable box or DSS ®... -
Page 10: Using Menus And The Remote Control
If you want to exit any on-screen menu, simply press the SEARCH/EXIT button on the remote control. If the main menu does not appear, make sure the TV is tuned to the same channel as the VCR output CH of VCR function setup on the menu, and check for the VCR indicator on the front display. -
Page 11: Setting The Clock
If AUTO CLOCK SET is unsuccessful, check local station listings for channels with Coordinated Universal Time. Tune the VCR to one of these channels, and turn the VCR off. If the time does not set within 20 minutes, set the time and date manually. -
Page 12: Manually Setting The Clock
Press the MENU button again when you finish setting the clock. Page 8 VCR Setup and ❿ to MAIN MENU Timer recording ❿Clock set/adjust Channel setup VCR function setup Language/Lengua/Langue ❷ % /❿] CLOCK SET/ADJUST AUTO ❿ MANUAL Select [ ] and press [❿] ❷... -
Page 13: Setting The Channels
Once the VCR memorizes all the available channels, you can use the CH/TRK Setting the Source Before the VCR can memorize available channels, you must set the signal source for your VCR. With the VCR on, press the MENU button. -
Page 14: Vcr Functions
01925A CMV62002 7/27/02 5:01 PM VCR Functions To make all of the VCR’s features available, set the VCR functions before playing or recording a tape. Record speed The VCR can record at two tape speeds. The slower- speed (SLP) allows the VCR to record more program material on a tape. - Page 15 Audio Output (CMV62002 only) The VCR can record a program in stereo. It can also be set to record the Secondary Audio Program (SAP) of any broadcast with second language audio. The VCR records the same audio on both the Hi-Fi and linear tracks on the tape.
-
Page 16: Tape Length
❿ to set “Auto power off” to 1Hr or 2Hr. “Auto power off ” sets the VCR to turn off automatically. Note: VCR will shut off 1 or 2 hours after the last button is pressed. Page 12 VCR Setup... - Page 17 VCR output channel, the message at right will appear. Set the TV channel so it matches the VCR output channel. Note: The VCR output Channel is set to 3 at the factory. Page 13 VCR Setup...
-
Page 18: Vcr Operation
Play and Pause/Still • Press the PLAY button on the remote control or on the front of the VCR to play a video. (If Auto play is selected and the video tape has no safety tab, it will begin playing automatically when you insert it in the VCR.) - Page 19 VCR Operation Key Lock If you do not want others to operate the VCR (for example if you have programmed a timer recording) you can set the VCR to lock out all button controls. Press and hold the TV/VCR button on the remote control for 5 seconds.
-
Page 20: Using The Display Button
Press the DISPLAY button again to remove display from the TV screen. Note: In order for display information to be accurate, set up the tape length in the VCR Function Setup first (page 12). Record file information •... -
Page 21: Recording
To end recording, press the STOP button. Separate Recording and Viewing You can view a different program from the one you’re recording if your VCR is connected to your anten- na or cable system. When using a cable decoder box, use an A/B switch. -
Page 22: Timer Recording
The Timer feature allows you to set the VCR to automatically record up to eight different programs. Setting a timer recording Your VCR can record on a specific day, or every day, Monday through Friday. Daily and weekly programs remain in the timer until erased. A single program is erased after the program records. -
Page 23: Copying Or Dubbing A Video
TO CANCEL THE TIMER PROGRAM, select the program you want to cancel in the timer recording list. Press the CLEAR button twice on the remote or EJECT button on the VCR to clear the Timer Program settings. The contents are then cleared. -
Page 24: Care And Maintenance
• Proper ventilation ensures that overheating will not damage electronic circuits. Don’t block ventilation holes. • Take care of your remote control. Keep the remote with your VCR, where it is unlikely to be lost or damaged. • Keep liquids away from your VCR, including beverages and cleaning liquids. Spilling any liquid on the VCR can damage the electronics, resulting in an electric shock or fire. -
Page 25: Troubleshooting
• Press EJECT to see if a cassette is already in the VCR. inserted. • Make sure the cassette is window side up, with the arrow facing toward the VCR. • Make sure the VCR is not in Key Lock mode. -
Page 26: Guide De Reference Rapide
Siga el diagrama para conectar el VCR auna caja decodificadora. Coloque el interruptor de Canal de Salida ubi- cado en la parte posterior del VCR en 3 para igualar el canal selecciona- do en el televisor. -
Page 27: Vcr Operation
VCR. Usted puede comprar este transformador en cualquier tienda que venda productos electrónicos. Reproducción de cintas de videocasete Encienda el TV e inserte un casete en el VCR. Presione PLAY, si es necesario. Si el indicador de VCR en el panel frontal no se ilumina, presione TV/VCR. -
Page 28: Specifications
Record/Play Time: FF/Rewind Time: Power Source: Power Output: Dimensions: Weight: Your VCR can receive 68 broadcast TV channels or up to 125 unscrambled cable channels. Check your local cable company for complete compatibility requirements. Type Number of Channels On Air... -
Page 29: Warranty 2
01925A CMV62002 7/27/02 5:01 PM Page 25 LIMITED WARRANTY TO ORIGINAL PURCHASER This Curtis Mathes brand product, as supplied and distributed by Curtis Mathes and delivered new, in the origi- nal carton to the original consumer purchaser, is warranted by Curtis Mathes against manufacturing defects in materials and workmanship for a limited warranty period of: Ninety (90) Days Labor and One (1) Year Parts This limited warranty begins on the original date of purchase, and is valid only on products purchased and used... - Page 30 01925A CMV62002 7/27/02 5:01 PM Page 26 THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED AND DESCRIBED ABOVE, AND NO WARRANTIES WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY AFTER THE EXPRESS WARRANTY PERIODS STATED ABOVE, AND NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR CORPORATION WITH RESPECT TO THIS PRODUCT SHALL BE BINDING ON Curtis Mathes.
- Page 31 01925A CMV62002 7/27/02 5:01 PM Page 27 This product is listed by Underwriter’s Laboratories, Inc. It is designed and manufactured to meet rigid U.L. safety standards against X-radiation, fire casualty and electrical hazards. ENERGY STAR ® As an Partner, Curtis Mathes has determined that this product or product model meets the ENERGY STAR ®...