Plug And Play; Warranty - Curtis Mathes CMV42002 Owner's Manual

01925A CMV62002 7/27/02 5:01 PM
External Stereo Connections (CMV62002 only)
Out to Audio System
Connecting your stereo VCR to an external
amplifier and speakers can improve the sound
quality. The sound from the VCR can be heard
through the stereo.
In from Audio System
If you want to record a stereo signal from
external audio equipment, you can send the
audio signal from the stereo to the VCR.

Plug and Play

The VCR's clock and tuner channels are set automatically when the VCR is plugged into the AC outlet.
If you use a cable box or DSS
1
Plug the VCR into the AC outlet.
2
Don't press any buttons on the VCR or remote
during auto setup.
3
"AUTO" blinks while the VCR automatically sets
the clock using information provided by the local
PBS channel.
While "AUTO" is blinking, channel memory is also set
automatically.
See page 7 for more information.
4 When Auto Setting has been completed, the VCR
displays the current time. You can now use your
VCR.
NOTES:
• If the time displayed in step 4 is incorrect, perform the Manual Clock Set procedure (refer to page 8).
• There are some PBS channels that do not transmit clock setting data. If your antenna cable is properly
connected and "- - : - -" is displayed, perform the Manual Clock Set procedure (refer to page 8).
Page 5
VCR Setup
LINE IN
® box, plug & play will not function.
F.F
EJECT
PLAY
REW
REC STOP MENU
PROG
F.F
EJECT
PLAY
MENU REW
REC STOP
CHANNEL
F.F
EJECT
PLAY
REC STOP MENU REW
PROG
5