Recording; One Touch Recording(Otr) - Curtis Mathes CMV42002 Owner's Manual

01925A CMV62002 7/27/02 5:01 PM

Recording

Recording while you watch
1
Insert a video cassette with the record protect safety
tab intact. Check the tape speed. If the VCR indicator
on the front panel is not lit, press the TV/VCR button.
2 Select a channel to record by pressing CH/TRK
or the number buttons.
3 Press the REC button on the remote control or the
front of the VCR. The REC indicator will light.
4 If you want to edit out unwanted material during
recording, press the P/STILL button while recording
and the VCR will pause. To resume recording, press
the P/STILL button again.
5
To end recording, press the STOP button.
Separate Recording and Viewing
You can view a different program from the one you're recording if your VCR is connected to your anten-
na or cable system. When using a cable decoder box, use an A/B switch.
While recording on one channel, press the TV/VCR button on the remote control to select TV viewing. The VCR
indicator light on the front display shuts off. Select the channel you want to watch with the TV's channel buttons.
One Touch Recording (OTR)
1 Insert a video tape, check the tape speed, and select
the channel you want to record, using the CH/TRK
or number buttons.
2 Press the REC button on the remote control or the
front of the VCR the number of times that corre-
sponds to length of record time you desire
(see chart below). The Record length time appears
on the screen.
3 The VCR will turn off automatically at the end of the
recording time. To stop an OTR recording in
progress, press the POWER button on the remote
control or on the front of the VCR
Page 17
VCR Operation
VCR
VCR
VCR
RECORD
Press once
Press 2 times
Press 3 times
Press 4 times
Press 5 times
Press 6 times
Press 7 times
Press 8 times
Record length 0:30 11
SP
Display Record time
Record Not timed.
R 0:30 30mins
R 1:00 1 hour
R 1:30 1 hour + 30 mins
R 2:00 2 hours
R 3:00 3 hours
R 4:00 4 hours
Record Not timed
17