Setting The Channels - Curtis Mathes CMV42002 Owner's Manual

01925A CMV62002 7/27/02 5:01 PM

Setting the Channels

Once the VCR memorizes all the available channels, you can use the CH/TRK
Setting the Source
Before the VCR can memorize available channels, you must set the signal source for your VCR.
1
With the VCR on, press the MENU button.
and ❿ to select "Channel setup."
Press
2
If you have a cable system hooked up to your VCR,
leave CABLE TV displayed in the Ant/Cable screen.
3
If you have an antenna hooked up to your VCR, press
❿ until ANTENNA appears. Press the MENU button
when you have selected the correct signal source.
Memorizing the Channels
1 Press the MENU button. Press
"Channel Setup."
and ❿ to start Auto channel memory function.
2
Press
3
Your VCR will begin memorizing all available channels.
To interrupt, press the MENU button on the remote con-
trol. When the channel number on screen stops chang-
ing, the VCR has finished.
Adding or Deleting Memorized Channels
You can add or delete channels that have been memorized with the Automatic Channel Memory function. The Auto
Channel Memory function must be performed before Channel Add/Delete can be used.
1
Press the MENU button. Press
"Channel Setup."
and ❿ button to select "Channel Add/Delete."
2
Press
3
Press two number buttons or press CH/TRK
the channel you want to add or delete. For numbers
over 100, press the 100 button on the remote control
first.
For example : To add channel 7, press 0 then 7.
For example : To delete channel 121, press the 100 button,
then 2 and 1.
4 To ADD the selected channel: Press ❿ button on the
remote control.
To DELETE the selected channel: Press ➛!button on
the remote control.
When you have finished, press the MENU button twice.
Note: • A deleted channel can be accessed with the number buttons, but the CH/TRK
• To add the LINE input to channel memory, select LINE using the INPUT SEL button on the remote
control, then press ❿ button on the remote control.
Page 9
VCR Setup
and ❿ to select
and ❿ button to select
for
buttons to select channels.
CHANNEL SETUP
❿ Ant/Cable: [CABLE TV]
Auto channel memory
Channel add/delete
❷ % [ /❿] [MENU/EXIT]
CHANNEL SETUP
Ant/Cable: [CABLE TV]
❿ Auto channel memory
Channel add/delete
[ ❷ % /❿] [MENU/EXIT]
CHANNEL SETUP
Ant/Cable: [CABLE TV]
Auto channel memory
❿ Channel add/delete
[ ❷ % ! /❿] [MENU/EXIT]
CHANNEL ADD/DELETE
❿ Select channel: [ 01]
and press [ ❿ ] to ADD
press [ ➛ ] to DELETE
❷ % ! / ➛❿ ] [MENU/EXIT ]
[
buttons skip past it.
9