Installation Procedure - Miele H4080BM Technical Information

Technical Information
2.2

Installation Procedure

1. Ensure the opening in cabinet and supports allow for proper
installation.
2. Ensure the electrical supply meets the appliance requirements (see
data tag on the appliance for details).
3. Remove all materials from the oven.
4. Place the oven near cabinet opening.
5. Ensure power supply is off.
6. Connect the oven to the electrical supply.
7. Set the oven into the cabinet niche, push it all the way in and align as
necessary.
8. Open the oven and attach the appliance to the cabinets using two
retaining screws at the sides of the frame, as shown in Figure 2-2.
9. Perform "Before Using the Appliance" procedures (Refer to Section
2.3).
Figure 2-2: Installation Retaining Screw Locations
14
H4080BM Speed Oven