Getting To Know Your Moviebeam Receiver - Samsung MTR-1120U User Manual

Getting to know your MovieBeam receiver

Generally, you'll operate the MovieBeam receiver using your remote control. However, buttons on
the receiver let you rent and watch movies just as you would with a remote control. Here's where
they are and what they do:
1
2
3
4
1. Standby LED
Blinks when the remote control or front panel button is pressed. This is also the power button.
It is green when the receiver is sending video to your TV and orange when it is in
standby mode. It blinks when a button is pressed.
2. Main menu button
Pressing it will always bring you to the main menu. In standby mode, pressing this button turns
on the box.
3. Navigation star (see next page)
4. Antenna LED
The antenna LED is normally off. It turns red when the antenna needs adjustment.
Finishing Setup, Renting and Watching Movies 3-6