Home Theater/Av Controller With Multiple Inputs - Samsung MTR-1120U User Manual

8. Home theater/AV controller with multiple inputs.

An input is available.
When a home theater/AV controller has multiple inputs, you can directly connect the MovieBeam
receiver to any of the available inputs (regardless of whether they are labeled DVD, VCR, and son
on) the home theater/AV controller as shown below. Do not connect to the component video
connectors (labelled R, G, B).
Remember, you can substitute the S-video cable for the yellow connector on the A/V cable for
better picture quality. Details are on page 8.
You will need the following additional cables:
- Three A/V cables
*cables not included with the MovieBeam receiver.
1. Connect the A/V cable to the MovieBeam receiver OUT connectors. Plug the other end into
the IN connectors on the home theater A/V controller.
2. Connect the second A/V cable to the home theater A/V controller OUT connectors. Plug the
other end into the IN connectors on the TV.*
3. Connect the third A/V cable to the home theater A/V controller IN connectors. Plug the other
end into the OUT connectors on the VCR or other device.*
4. Connect the fourth A/V cable to the home theater A/V controller IN connectors. Plug the other
end into the OUT connectors on the DVD or other device.*
Basic Setup 1-
Setup 1-18
18