Tv With Several Inputs; Cable (S/Pdif) Is Used To Connect To Surround Sound System - Samsung MTR-1120U User Manual

7. TV with several inputs. An input is available. Digital audio

cable (S/PDIF) is used to connect to surround sound system.

When the surround sound has S/PDIF connectors, you can pass the audio signal through the
MovieBeam receiver as shown below. You will need the following cables:
- A/V cable (provided with the receiver)
- Two S/PDIF cables*
*cables not included with the MovieBeam receiver.
1. Connect the yellow connector of the A/V cable to the MovieBeam receiver video OUT
connector. Plug the other end into the video IN connector on the TV. Do not use the red and
white connectors.
2. Connect one end of the S/PDIF to the one of the S/PDIF connectors on the surround sound
system. Plug the other end into the S/PDIF connector on the DVD (or other device).*
Basic Setup 1-
Setup 1-16
16