Lithium Battery Installation; Instalación De La Pila De Litio - Samsung SC-D263 Owner's Instruction Book

Samsung sc-d263: user guide
Hide thumbs Also See for SC-D263:
Table of Contents

Advertisement

ENGLISH
Preparation

Lithium Battery Installation

Lithium Battery Installation for the
Internal Clock
1. Remove the Battery Pack from the rear of
the Camcorder.
2. Open the Lithium Battery Cover on the rear
of the Camcorder.
3. Position the Lithium Battery in the Lithium
Battery Holder, with the positive (
terminal face up.
Be careful not to reverse the polarity of the Battery.
4. Close the Lithium Battery Cover.
Lithium Battery Installation for the
Remote Control (SC-D364/D366 only)
1. Pull out the Lithium Battery Holder toward
the direction of the arrow.
2. Position the Lithium Battery in the Lithium
Battery Holder, with the positive (
terminal face up.
3. Reinsert the Lithium Battery Holder.
Precaution regarding the Lithium Battery
1. The Lithium Battery maintains the clock function and preset contents
of the memory; even if the Battery Pack or AC Power adapter is
removed.
2. The Lithium Battery for the Camcorder lasts about 6 months under
normal operation from time of installation.
3. When the Lithium Battery becomes weak or dead, the date/time
indicator will display <12:00 AM JAN.1,2006> when you set the
<Date/Time> to <On>.
When this occurs, replace the Lithium Battery with a new one (type
CR2025).
4. There is a danger of explosion if Battery is incorrectly replaced.
Replace only with the same or equivalent type.
Warning: Keep the Lithium Battery out of reach of children. Should
a battery be swallowed, consult a doctor immediately.
QUICK
MENU
MENU
CHG
)
)
Preparación
Instalación de la pila de litio
Instalación de la batería de litio
para el reloj interno
1. Retire la batería de la parte posterior de la
videocámara.
2. Abra la tapa de la batería de litio en la
parte posterior de la videocámara.
3. Coloque la batería de litio en su soporte,
con el terminal positivo (
Tenga cuidado de no
invertir la polaridad de la batería.
4. Cierre la tapa de la batería de litio.
Instalación de la batería de litio
para el control remoto
(sólo SC-D364/D366)
1. Tire del soporte de la batería de litio hacia
la dirección de la flecha.
2. Coloque la batería de litio en su soporte,
con el terminal positivo (
3. Vuelva a insertar el soporte de la batería
de litio.
Precauciones referentes a la batería de litio
1. La batería de litio hace funcionar el reloj y los preajustes de la memoria,
incluso aunque retire la batería principal o el adaptador de CA.
2. La batería de litio de la videocámara puede durar aproximadamente
6 meses en condiciones de funcionamiento normales desde el
momento de su instalación.
3. Cuando se debilite o se agote la batería de litio, el indicador de fecha
y hora mostrará <12:00 AM JAN.1,2006> cuando tenga definido
<Date/Time> en <On>. Cuando suceda, sustituya la batería de litio
por una nueva (tipo CR2025).
4. Existe peligro de explosión si la batería se coloca de forma incorrecta.
Cambie la pila sólo por una igual o de especificaciones equivalentes.
Advertencia: Mantenga la batería de litio fuera del alcance de los
niños. En caso de que alguien se tragara una por
accidente, avise inmediatamente a un médico.
ESPAÑOL
) hacia arriba.
) hacia arriba.
15
15

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents