Advertisement
Chapter 3
Operating Instructions
Initial Setup
3-1.
The Enforcer 200 comes fully assembled. The 200-gallon Premix Tank and Compressed
Air Cylinder must be filled prior to use. The proper FIREBULL® Fluorine Free Foam
product should be selected based on operational ambient temperatures and type of
anticipated fires before putting the unit into service.
FIREBULL® Fluorine Free Foam Products
3-2.
a. Enforcer 3 Backpack should only be used with FIREBULL® Fluorine Free Foam
products mixed at a 1%, 3% or 6% solution for low, medium and high expansion.
b. It is recommended that a FIREBULL® Freeze Protected Fluorine Free Foam Product
be used when positioning the unit outside during extended subfreezing weather.
System Depressurization
3-3.
Ensure the system is depressurized before conducting maintenance
a. Close the Air Cylinder Valves.
b. Open nozzle until all Nitrogen is deployed and working pressure gauge reads zero or
open Pressure Relief Valve.
Preventative Maintenance Checks & Services (PMCS)
3-4.
a. It is recommended that the PMCS CHECKLIST be completed every month.
b. Personnel conducting the PMCS should be thoroughly familiar with the Enforcer 200
system and the information contained in this manual.
Enforcer One, LLC
Copyright 2020
FIREBULL® is a registered trademark of Enforcer One, LLC
Page 7
Advertisement
