Advertisement
Chapter 4
Training
Training Program
4-1.
a. Training on the Enforcer 200 should be conducted or reviewed annually for all
operators
b. Maintenance personnel should complete initial training and refresher training as
required
c. Trainers should be thoroughly familiar with the system, fire behavior, hazard
identification, and basic firefighting techniques
d. Operator training should be accomplished in live fire scenarios. Live fire training can
often be accomplished through coordination with a local fire department.
Training Program of Instructions
4-2.
a. Operators and Maintenance Personnel
1. PMCS
2. Normal and Cold Weather Operating Instructions
3. Emergency Procedures
4. Operation in live fire scenario
b. Maintenance Personnel
1. General Maintenance
2. Instructions and Technical Assistance
3. Foam Product
4. Maintenance Log
5. Servicing Under Normal and Cold Conditions
6. Scheduled Maintenance
7. Unscheduled Maintenance
8. Troubleshooting Procedures
9. Storage and Protection
Enforcer One, LLC
Copyright 2020
FIREBULL® is a registered trademark of Enforcer One, LLC
Page 10
Advertisement
