Technical Specifications Of The Scalance Xc224 - Siemens SIMATIC NET SCALANCE XC-200 Series Operating Instructions Manual

Technical specifications

7.6 Technical specifications of the SCALANCE XC224

Technical specifications
Installation options
Mean time between failure (MTBF)
MTBF (EN/IEC 61709; 40 °C)
Note the wiring rules (Page 51).
1)
7.6 Technical specifications of the SCALANCE XC224
The following technical specifications apply to the SCALANCE XC224.
Technical specifications
Attachment to Industrial Ethernet
Electrical connectors
Diagnostics interface
Serial interface
Electrical data
Power supply
1)
Current consumption
Effective power loss
Overvoltage category
Fusing
Signaling contact
1)
Permitted ambient conditions
Ambient temperature
Relative humidity
66
● Wall mounting
● Installation on a DIN rail
● Mounting on an S7-300 standard rail
● Mounting on an S7-1500 standard rail
> 48 years
Quantity
Connector
Properties
Transmission speed
Quantity
Connector
Rated voltage
Voltage range (incl. tolerance)
Design
Property
12 VDC
24 VDC
Quantity
Design
Permitted voltage range
Load capability
During operation up to 2000 m
During storage
During transportation
During operation at 25 ℃
24
RJ-45 jack
Half/full duplex, MDI‑X pinning
10 / 100 Mbps
1
RJ-11 jack
12 to 24 VDC
9.6 to 31.2 VDC Safe Extra Low Voltage
(SELV)
Terminal block, 4 terminals
Implemented redundantly
750 mA
375 mA
9 W
CAT II
2.5 A / 125 V
1
Terminal block, 2 terminals
24 VDC
max. 100 mA
-40 °C to +70 °C
-40 ℃ to +85 ℃
-40 ℃ to +85 ℃
≤ 95 % no condensation
Operating Instructions, 12/2017, C79000-G8976-C442-03
SCALANCE XC-200