Miele PG 8504 Operating Instructions Manual page 68

Laboratory glassware washer for laboratory glassware and utensils
Table of Contents

Advertisement

Settings 
Display
68
If necessary, the machine can set to standby for use during breaks in
operation.
- An option to display the time of day must be selected for this pur-
pose.
- Additionally, automatic shutdown must be activated and a standby
duration set in "
Additional settings
Once the set standby time elapses, the machine is activated for use.
During standby, the machine remains switched on and the time is
shown on the display. Pressing any button reactivates the machine.
Open the systems menu by switching the machine off with the 
button and then with the  button held, switch it back on with the
 button.
Open the menu as follows:
Settings 
     
         
Time of day
Display
             
-
On
Once the set standby time elapses, the machine is permanently ac-
tivated for use and the time appears on the display.
On for 60 seconds
-
Once the set standby time elapses, the machine is activated for
use for 60 seconds. After the 60 seconds have elapsed, the ma-
chine switches off. The time appears on the display while the ma-
chine is in standby.
Do not display
-
After the standby time has elapsed, the machine switches off. The
time no longer appears on the display.
Use the  and  arrow buttons to select an option.
Press OK to save the setting.
/
Switch off after
Display
Do not display
On
".

Advertisement

Table of Contents
loading

Table of Contents