Storing The Stations Manually - Samsung TB15X5 Owner's Instructions Manual

V.MENU
GB
DISPLAY
MENU
PICTURE
TUNE
SETUP
--:--
ADJUST
TUNE
MANUAL TUNE
AUTO TUNE
ADJUST
CURRENT PR.
NEW PR.
NAME
SEARCH
FREQUENCY
AFT
SYSTEM
:STORE X:CLEAR
ADJUST
CURRENT PR.
NEW PR.
NAME
SEARCH
FREQUENCY
AFT
SYSTEM
:STORE X:CLEAR
ADJUST

Storing the Stations Manually

MUTE
P
MENU
P
P.STD
SELECT EXIT
SELECT EXIT
: P O
: P 0
: - - - - -
:
: 192.00MHz
: ON
: AUTO
EXIT
SELECT
: P O
: P 0
: - - - - -
:
: 192.00MHz
: ON
: AUTO
EXIT
SELECT
16
You can store up to 100 television stations, including those received
via the cable network. If you have a dual tuner model, the stations
are stored for both tuners at the same time (television and VCR).
When storing stations manually, you can choose:
Whether or not to store each of the stations found
The programme number by which you wish to identify
each stored station
To enter the frequency of the station to be stored
directly, if you know it
You have about 30 seconds to make each selection described
below. If you do not make a selection within this period of time,
the menu disappears.
If you wish to receive a scrambled television station,
check that the decoder is switched off. Switch it back on
once you have finished storing the stations.
1
Press MENU ( ).
Result: The television menu is displayed.
2
Select the TUNE option by pressing P
Result: The tuning menu is displayed with the MANUAL TUNE is
selected.
The TUNE option is not available if:
The AV input is selected; press INPUT (
ordinary station
A video cassette is playing; stop the cassette
3
Press the + button.
Result: The list of options is displayed.
4
If you...
Know the frequency of
the station to be stored
Do not know the frequency
of the station to be stored
, followed by the + button.
) to select an
Then...
Select the FREQUENCY option by
pressing P the required number of
times.
Enter the required frequency by
pressing the numeric buttons or the +
and - buttons.
Result: The station is displayed.
5
Go to Step on the following page.
Select the SEARCH option by pressing
P the required number of times.
Press:
to search backwards through the
-
frequencies
to search forwards through the
+
frequencies
Result: When a station is found,
the searching stops and
the channel is displayed
on the screen. You can then:
- Continue the search by
pressing + or - again
- Store the station; go to step
5
on the following page