Table of Contents
Advertisement
V.MENU
GB
MENU
PICTURE
TUNE
SETUP
--:--
ADJUST
SETUP
PANEL LOCK
ON TIMER
ADJUST
TIME
: 15:07
DATE
: 06/04/00
ADJUST
Switching the Sound Off Temporarily (MUTE)
MUTE
P
Setting the Combi Vision to Switch On Automatically
SELECT
EXIT
: OFF
: ON
SELECT
EXIT
THU
SELECT
EXIT
22
You can switch the sound off temporarily.
Example: You wish to answer the telephone.
1
Press the MUTE (
) button on the remote control.
Result:
The sound is switched off and
2
When you wish to turn the sound back on, press the same MUTE (
button again or press the VOL + button.
Result:
The sound returns at the same volume as before and the
indication disappears.
You can set your COMBI VISION to switch on automatically every
day and stop after one hour if none of its functions are used.
Before using this function, check that the time has been
correctly set. If it has not been set, the time and date
setting function is activated automatically; refer to
page 12 for further details.
1
Press MENU (
).
2
Select SETUP by pressing the P
times.
3
Press the + button.
Result:
The corresponding menu is displayed.
4
Select ON TIMER by pressing the P
times.
5
To...
Set the time at which the
television is to switch on
Cancel the automatic
switch on timer
6
Place the set in Standby mode, by pressing POWER (
Result:
The set will be switched on every day at the time requested
and will remain on for one hour if no other function is used
during this time.
is displayed on the screen.
or
buttons the required number of
or
buttons the required number of
Then...
1 Press the + button to display the clock.
2 Select the hour and minutes by
pressing the numeric buttons.
Press the + button once.
Result:
OFF is displayed.
).
)
Hide quick links:
Advertisement
Table of Contents
