Table of Contents
Advertisement
ENG
How to Set up Your PC Software (Windows only)
The Windows display-settings for a typical computer are shown below. But the actual screens on your PC will
probably be different, depending upon your particular version of Windows and your particular video card.
First, click on "Settings" on the Windows
start menu.
While "Settings" is highlighted, move the
cursor so that "Control Panel" is highlighted.
When the control panel screen appears,
click on "Display" and a display dialog-box
will appear.
Navigate to the "Settings" tab on the display
dialog-box.
➣
Both screen position and size will vary,
depending on the type of PC monitor and its
resolution.
Resolution Vertical frequency resolution
640 x 480
800 x 600
◆ The interlace mode is not supported.
◆ The TV operates abnormally if a non-standard
video format is selected.
➣
◆ The text quality of PC screen is optimum in the VGA mode (640 x 480), the full size displayed PC
◆ When this TV is used as a PC display, 24-bit color is supported (over 16 million colors).
◆ Your PC display screen might appear different, depending on the manufacturer (and depending on your
◆ If a vertical and horizontal frequency-select mode exists, select 60Hz (vertical) and 31.5kHZ (horizontal).
◆ In some cases, abnormal signals (such as stripes) might appear on the screen when the PC power is
◆ If a phenomenon with an unstable horizontal sync happens while using your PC, please check the power
Setting up your PC
75/60
75/72/60
mode is optimum in the SVGA mode (800 x 600).
particular version of Windows). Check your PC instruction book for information about connecting your PC
to a TV display-monitor.
turned off (or if the PC is disconnected). If so, press the TV
sure that the PC is connected.
saving mode and power condition of PC and cable connections.
36
(depending on the model)
➡
The two key variables that apply the TV-PC
interface are "resolution" and "colors." The
correct settings for these two variables are:
◆ Size (resolution): 800 x 600 pixels
◆ Color: "24-bit" color (might also be expressed
as "16 million colors") Shown at left is a
typical screen for "Display" dialog box.
If a vertical-frequency option exists on your
display settings dialog box, the correct value is
"60" or "60 Hz". Otherwise, just click "OK" and
exit the dialog box.
button to enter the TV mode. Also, make
800 by 600 pixels
Advertisement
Table of Contents
