Setting Up Your Remote Control - Samsung SP-42L6HX Owner's Instructions Manual

Setting Up Your Remote Control

English - 62
After it has been set up properly, your remote control can operate
in five different modes: TV, VCR, Cable, DVD, or Set-Top Box.
Pressing the corresponding button on the remote control allows
you to switch between these modes, and control whichever piece
of equipment you choose.
➢
The remote control might not be compatible with all
DVD Players, VCRs, Cable boxes, and Set-Top Boxes.
Setting Up the Remote to Operate Your VCR
1
Turn off your VCR.
2
Press the VCR button on your TV's remote control.
3
Press the SET button on your TV's remote control.
4
Using the number buttons on your remote control, enter three digits
of the VCR code listed on page 64 of this manual for your brand of
VCR. Make sure you enter three digits of the code, even if the first
digit is a "0". (If more than one code is listed, try the first one.)
5
Press the POWER button on the remote control. Your VCR should
turn on if your remote is set up correctly.
If your VCR does not turn on after set-up, repeat steps 2, 3 and 4,
but try one of the other codes listed for your brand of VCR. If no
other codes are listed, try each VCR code, 000 through 080.
➢
◆ Note on Using Remote Control Modes: VCR
➢
◆ When your remote control is in "VCR" mode, the volume
buttons still control your TV's volume.
Setting Up the Remote to Operate Your Cable Box
1
Turn off your cable box.
2
Press the CABLE button on your TV's remote control.
3
Press the SET button on your TV's remote control.
4
Using the number buttons on your remote control, enter three digits of
the cable box code listed on page 65 of this manual for your brand of
cable box. Make sure you enter three digits of the code, even if the
first digit is a "0". (If more than one code is listed, try the first one.)
5
Press the POWER button on the remote control. Your cable box
should turn on if your remote is set up correctly.
If your cable box does not turn on after set-up, repeat steps 2, 3
and 4, but try one of the other codes listed for your brand of cable
box. If no other codes are listed, try each code, 000 through 046.
➢
◆ Note on Using Remote Control Modes: Cable Box
➢
◆ When your remote control is in "CABLE" mode, the
volume buttons still control your TV's volume.
continued...