Becoming Familiar with the Remote Control
The remote control is used mainly to:
◆ Change channels and adjust the volume.
◆ Set up the television using the on-screen menu system.
The following table presents the most frequently used buttons and
their functions.
Button
Viewing Function
Used to display the next
P
stored channel.
Used to display the
previous stored channel.
Used to display the corresponding channels.
to
➢
For double digit channels, the second digit must be
pushed immediately after the first. Failure to do this
will result in a single digit channel being displayed.
-/--
Used to select a channel numbered ten or over.
Press this button, and the
Enter the two-digit channel number.
Used to increase the volume.
Used to decrease the volume.
Used to switch the sound off temporarily.
MUTE
➢
(
)
To turn the sound back on, press this button
again, or press the
MENU
Used to display the
(
)
on-screen menu system.
-
-
EXIT
(
)
Press the PRE-CH button. The TV will switch to the last
PRE-CH
channel viewed. To quickly switch between two channels
that are far apart, select the first channel, then use the
numeric buttons to select the second channel. Then, use the
PRE-CH button to quickly alternate between them.
Menu Function
-
-
"--" symbol is displayed.
or
button.
Used to return to the previous
menu or normal viewing.
Used to:
◆ Display a sub-menu
containing selections for
the current menu option.
◆ Increase/decrease a
menu option value.
Used to confirm your choice.
Used to exit from the menu
system and return to normal
viewing directly.
English - 15