Connecting Home Theater System
Use the AV OUT ports of the TV for Home Theater System Connections.
Rear of the TV
Connecting the Home Theater System
①
Connect the monitoring audio out L and R jacks of the AV OUT
on the rear-side connection panel of the TV to the AUDIO IN
jacks of the DVD Home Theater System (or AV Receiver) using
the audio cable.
②
Press the SOURCE (
device connected to the TV.
③
If you want to hear the sound through separate speakers,
cancel the internal amplifier.
➢
Please be sure to match the colour coded input terminals and cable jacks.
☛
◆ Refer to corresponding user's manual from the manufacturer for wiring the
speakers to the DVD Home Theater System (or AV Receiver).
◆ Disable the TV internal speaker to enjoy the rich sound through the
speakers of your Home Theater System.
To Display the DVD Home Theater
! Turn the TV on and press the SOURCE (
Component1 (or Component2).
@ Be sure to connect the video cable properly if desired external input AV1 (AV2 or AV3) or
Component1 (or Component2). cannot be selected.
# Play the DVD after activating the DVD Home Theater System.
$ Use the volume control of the Home Theater System while watching the TV using the DVD Home
Theater, where the TV does not produce the audio.
) button to select the desired external
) button to select the AV1 (AV2 or AV3) or
①
DVD Home Theater
②
AV Receiver Amplifier
English - 59