Table of Contents
Advertisement
Installation checklist
The installer must complete the installation checklist below and make sure the guide is left with the
homeowner. They must also instruct the homeowner about the use and care of the appliance and
ensure understanding about the safety instructions.
F Appliance positioned in a suitable location with required clearances
F All packaging and protective materials removed prior to operation
F Appliance test point pressure correct for the installation, and flue config. adjusted if necessary
F Only Rinnai Energysaver flue components used
F Air inlet hose and flue connections secure
F Heater secured to the wall
F Gas connection correct and gas supply pipe purged of foreign matter before connection
F Appliance inlet pressure correct with all other gas appliances operating
F Where applicable condensate trap has been installed and connected
F Flue clearances and installation as per AS/NZS 5601.1:2013
F Customer advised to service the heater every two years
Installer details
Company name:
Installer name:
Address:
Phone:
Certificate of compliance number for installation:
Signed:
26
Mobile:
Date:
Advertisement
Table of Contents
