Speakers; Removing The Speakers - Dell P135G Service Manual

5. Connect the audio daughter-board flexible flat cable and the speaker cable to the respective connectors on the system
board.
Next steps
1. Install the 3-cell battery
2. Install the base cover.
3. Follow the procedure in

Speakers

Removing the speakers

Prerequisites
1. Follow the procedure in
2. Remove the base cover.
3. Remove the 3-cell battery
About this task
The following image indicates the location of the speakers and provides a visual representation of the removal procedure.
Steps
1. For systems shipped with 5G antennas, remove the three screws (M2x2.5) that secure the WWAN shielding cover to the
system board.
2. For systems shipped with 5G antennas, slide and remove the WWAN shielding cover from the system board.
3. For systems shipped with 4G antennas, disconnect the speaker cable from the connector on the system board.
4. For systems shipped with 5G antennas, disconnect the P-sensor cable and the speaker cable from the respective connectors
on the system board.
or the 4-cell battery, whichever applicable.
After working inside your
Before working inside your
or the 4-cell battery, whichever applicable.
computer.
computer.
Removing and installing components 63