Samsung CS761 Owner's Instructions Manual page 29

Picture in Picture (Option)
➣
Preference : Concerning the functions of "PinP : On".
PIP ON/OFF button
CH ▲ / ▼ button
MULTI button
ROTATE button
SWAP button
SCAN button
STILL button
➣
◆
On the condition of Multi PIP it is impossible to execute
Swap and Still.
◆
Everytime the "MULTI" button is pressed, the Program
number and the location of the Sub picture are changed.
(See figures below)
PR 1
PR 6 PR 7
PR 8 PR 9
PR 9 PR 10 PR 11
PR 13 PR 14 PR 15
(cont.)
◆
Press this button to operate ON/OFF function of
PinP on the remote control directly.
◆
Press this button to select the channel of Sub
picture.
◆
Press the MULTI button to view memorized
channels to a maximum of 9 on the Sub picture
spontaneously.
◆
Press this button to move the Sub picture
counterclockwise.
◆
Press this button to interchange the Main picture
and the Sub picture.
➣
When the Main picture is in the Video
mode and the Sub picture is in the TV
mode, you might not hear the sound of
Main picture when pressing the SWAP
button after changing the Sub picture
channel. At this time, reselect the Main
picture channel.
◆
Press the SCAN button to scan every
memorized channel in order. Press it again to
stop scanning.
◆
Press this button to still the Sub picture, so that
the edges of Sub picture turn RED.
Press this button again to cancel, so that the
edges of Sub picture revert to GRAY.
PR 1
PR 3 PR 4 PR 5 PR 6
PR 16 PR 17
PR 18 PR 19
PR 12 PR 20 PR 21
PR 16 PR 22 PR 23
VOL
SWAP
PR 1 PR 2
PR 2
PR 3
PR 23 PR 24 PR 25
PR 26 PR 27 PR 28
PR 29 PR 30 PR 31
VOL
CH
PIP MULTI ROTATE
ON
CH SCAN STILL
29
ENG