Related Manuals for Samsung CS21S1
Summary of Contents for Samsung CS21S1
-
Page 1: Remote Control
ELECT Owner’s Instructions Before operating the unit, please read this manual thoroughly, and retain it for future reference. REMOTE CONTROL ON-SCREEN MENUS TELETEXT FUNCTION COLOUR TELEVISION... -
Page 2: Safety Instructions
NOT REMOVE REAR COVER, NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Main voltage : 220V-240V~, 50Hz (or Indicated on the rear of the TV set). Do NOT expose the television to direct sunlight. During a storm conditions... -
Page 3: Table Of Contents
Contents PREPARING YOUR TELEVISION Safety Instructions ... Caution ... Front Control Panel ... Connection Panels ... Infrared Remote Control ... Inserting the Batteries in the Remote Control... Connecting the Aerial (or Cable Television Network)... Switching Your Television On and Off... Placing Your Television in Standby mode ... -
Page 4: Front Control Panel
Front Control Panel MENU DISPLAY VOLUME ADJUSTMENT Connection Panels Front of TV HEADPHONE JACK RCA AUDIO/VIDEO INPUT CONNECTORS Buttons and markings are subject to change. STAND BY/TIMER CHANNEL SELECTION INDICATOR REMOTE CONTROL SENSOR Rear of TV SCART AUDIO/VIDEO INPUT/OUTPUT CONNECTORS... -
Page 5: Infrared Remote Control
TEMPORARY SOUND SWITCH-OFF SOUND MENU DISPLAY VOLUME DECREASE PREVIOUS CHANNEL/ TELETEXT PREVIOUS PAGE Operation of remote control may be affected by bright artificial light near to the TV set. TELETEXT DISPLAY/MIX TUNER/CABLE NETWORK SELECTION EXTERNAL INPUT SELECTION/ TELETEXT LIST/FLOF MODE SELECTION... -
Page 6: Inserting The Batteries In The Remote Control
Inserting the Batteries in the Remote Control Connecting the Aerial (or Cable Television Network) Cable Television Network Rear of TV You must insert or replace the batteries in the remote control when you : Purchase the television. Find that the remote control is no longer operating correctly. -
Page 7: Switching Your Television On And Off
Switching Your Television On and Off The mains lead is attached to the rear of the television. If you have purchased this television in the United Kingdom, refer to rear cover for further instructions on plug wiring. Plug the mains lead into an appropriate socket. Use a wall socket with a voltage of between 220 and 240 Volts. -
Page 8: Plug And Play Feature
Input Check” is displayed. If any language is not selected on the “Language” menu, the “Language” menu will be displayed about 30 seconds later. Make sure that the antenna is connected to the TV. And then press – button. Result: The “Auto store”... -
Page 9: Viewing The Demonstration
Viewing the Demonstration To become familiar with the various menus provided by your television, you can view the inbuilt demonstration. Press the MENU button. Press the button to select the “Function” and press the – button. Press the button to select the “Demonstration” and press –... -
Page 10: Choosing Your Language
“Function”. – Press the button to select the “Language”. Select a particular language by pressing the repeatedly. When you have finished, press the TV MENU button repeatedly to return to normal viewing. button button or, press the... -
Page 11: Storing The Channels Automatically
Storing the Channels Automatically You can scan the frequency ranges available on your television and in your country and store all the channels found automatically. The channels are stored in the order in which they appear in the frequency bands. It is possible that the automatically allocated numbers may not correspond to those by which you wish to identify the channels. -
Page 12: Storing The Channels Manually
Storing the Channels Manually Channel Auto store Manual store Name Add/Erase Fine tune Sort Channel Auto store Manual store Name Add/Erase Fine tune Sort Manual store Colour system : Auto Sound system : BG Search : 138MHz Channel : S 6 Prog.No. - Page 13 “Store” and press the Result: “OK” is displayed. Repeat Steps for each channel to be stored. When you have finished manual storage, press the TV or, press the MENU button repeatedly to return to normal viewing (continued...) – button.
-
Page 14: Giving Channels Names
Letters of the alphabet (A...Z) Numbers (0...9) Special characters (space, -) You can have each channel newlynamed. When you have finished entering the name, press the TV button or, press the MENU button repeatedly to return to normal viewing. –... -
Page 15: Skipping Unwanted Channels
Skipping Unwanted Channels You can exclude the channels of your choice from the channel scan operation. When you scan through the stored channels, those you have chosen to skip are not displayed. All channels that you do not specifically choose to skip are displayed during scanning. -
Page 16: Fine Tuning Channel Reception
When you have finished, press the TV MENU button repeatedly to return to normal viewing. – button. Result: The horizontal bar’s cursor moves to the left or right. -
Page 17: Sorting The Stored Channels
Channel 3 becomes channel 1. To... Press the... Confirm the exchange of channel numbers When you have finished sorting channels, press the TV or, press the MENU button repeatedly to return to normal viewing – button to select the “Store”. –... -
Page 18: Changing The Picture Standard
Press the choices: Custom, Standard, Sport, Natural, Mild. When you are satisfied with the settings, press the TV or, press the MENU button repeatedly to return to normal viewing. You can use your remote control to select the type of picture which best corresponds to your viewing requirements. -
Page 19: Adjusting The Picture Settings
Sharpness Colour Tint (NTSC only) When you are satisfied with the settings, press the TV press the MENU button repeatedly to return to normal viewing. The television has an “automatic degaussing” system that is activated if magnetic interference is present. To degauss the television screen, switch power off by pressing the “... -
Page 20: Activation/Deactivation The Digital Noise Reduction Feature
– Press the button. Press the button to select the “Digital NR”. To select the “On” by pressing the When you have finished, press the TV MENU button repeatedly to return to normal viewing. – button. button or, press the... -
Page 21: Changing The Sound Standard
Custom, Standard, Music, Movie, Speech. When you are satisfied with the settings, press the TV or, press the MENU button repeatedly to return to normal viewing. You can use your remote control to select the type of special sound effect to be used when watching a given broadcast. -
Page 22: Adjusting The Sound Settings
Move to the next setting Move back to the previous setting When you are satisfied with the settings, press the TV or, press the MENU button repeatedly to return to normal viewing. Changes made to these settings while the Custom mode is selected are memorized, and are recalled when you switch the television back on. -
Page 23: Extra Sound Settings
Melody You can hear clear melody sound when the TV is powered ON or OFF. Pseudo stereo “Pseudo stereo” converts a monaural sound signal into two identical left and right channels. -
Page 24: Selecting The Sound Mode (Depending On The Model)
Selecting the Sound Mode The “S.MODE I-II” button displays/controls the processing and output of the audio signal. When power is switched ON, the mode is automatically preset to either “Dual-I” or “STEREO”, depending on the current transmission. Type of broadcast Regular broadcast (Standard audio) NICAM Mono... -
Page 25: Selecting The Turbo Sound
Selecting the Turbo Sound Turbo sound suitably emphasizes both higher and lower bands of sound (and includes other effects). To enjoy more magnificent and dynamic sound when watching music, movie or other channel, simply press the TURBO button on the remote control. -
Page 26: Setting The Sleep Timer
Setting the Sleep Timer You can select a time period of between 30 and 180 minutes after which the television automatically switches to Standby mode by pressing the "SLEEP Press the SLEEP Result: If the sleep timer is... Already set Not yet set Press the SLEEP preset time intervals (30, 60, 90, 120, 150, 180). -
Page 27: Setting And Displaying The Current Time
The “Time” menu is displayed with the “Clock” selected. To... Move to the hour or minute Set the hour or minute When you have finished, press the TV MENU button repeatedly to return to normal viewing. To display the... Press the “DISPLAY Channel information Once. -
Page 28: Switching The Television On And Off Automatically
Fuzzy Power Off If no function buttons (including remote control buttons or front panel buttons) are operated for three hours after the TV is turned on by “On time”, the TV will be automatically turned off. Press the... button. -
Page 29: Setting The Blue Screen Mode
“Blue screen”. Press the button to select the required option (On/Off). When you have finished, press the TV MENU button repeatedly to return to normal viewing. Activating the Childlock When the Childlock is switched ON with the channel that you want to lock, the screen becomes blue. -
Page 30: Teletext Decoder
To display the actual broadcast simultaneously with the teletext page, press the TTX/MIX ( ) button. To return to normal viewing press the TV If any broken character appears while TTX is being viewed, make sure that the TTX language is identical with the language in the “Function”... -
Page 31: Selecting A Specific Teletext Page
Selecting a Specific Teletext Page Press the number buttons on the remote control to enter the page number directly: Enter the three-digit page number listed in the contents by pressing the corresponding numeric buttons. Result: The current page counter is incremented and the page is then displayed. -
Page 32: Using Flof To Select A Teletext Page
The page is displayed with additional color-coded information that can be selected in the same way. To display the: Previous page Next page When you have finished, press the TV normal broadcast. Up to four teletext pages can be stored. Select the LIST mode. Result: Four 3-digit numbers are displayed in different colors at the bottom of the screen. -
Page 33: Connecting To The Av-1 Or 2 Scart Input/Outputs
Connecting to the AV-1 or 2 SCART Input/Outputs AV-1 is used for equipment with an RGB output, such as video game devices and video disc players or a VCR. Rear of TV This end can be fitted with: A SCART connector... -
Page 34: Connecting Headphones
Switch the television on and if necessary, press the VIDEO button one or more times until the required input is displayed. Depending on the source selected, the pictures may appear automatically. To watch television programmes again, press the TV button and select the number of the channel required. -
Page 35: Automatic Degaussing To Remove Colour Patches
Troubleshooting: Before Contacting Service Personnel Before contacting Samsung after-sales service, perform the following simple checks. If you cannot solve the problem using the instructions below, note the model and serial number of the television and contact your local dealer. - Page 36 - AFTER SALES SERVICE - Do not hesitate to contact your retailer or service agent if a change in the performance of your product indicates that a faulty condition may be present. ELECTRONICS AA68-01214B (ENG)