Page 1
COLOUR ELECT TELEVISION 721A/761A/823A/893A 727A/767A Owner’s Instructions Before operating the unit, please read this manual thoroughly, and retain it for future reference. REMOTE CONTROL MENU CONTROL TELETEXT FUNCTION(OPTION) PICTURE IN PICTURE(OPTION)
• You can select one of five sound modes (Custom, Standard, Music, Movie, Speech) you want to hear. Caution ☛ The main voltage is indicated on the rear of the TV set and the frequency is 50 or 60Hz. Mode PAL-B/G PAL-I PAL-B/G, SECAM-B/G PAL-B/G, D/K, SECAM-B/G, DK PAL-I (WITH VHF BAND) PAL-B/G, D/K, SECAM-B/G, D/K, NT4.43MHz...
Inserting the Batteries in the Remote Control ... ■ Connecting the Aerial (or Cable Television Network) ... ■ How to Use this Manual ... ■ Quick reference guide for your TV set ... ■ Antenna Connections... ■ Video Connections ... ■...
Safety Instructions Place this TV on a stable stand or table. Adequate ventilation is essential to prevent failure of electrical components. Never put objects of any kind into the TV set, and do not place a water-containing vessel on the set.
Plug the aerial or cable network input cable into the socket at the bottom of the television’s rear panel. If you are using an indoor aerial, insert the bottom of the aerial into the support bracket on the top of the television. 75Ω Cable Television VHF/UHF Network Rear of TV...
How to Use this Manual Quick reference guide for your TV set Check the Model Number of your TV set; the Model Number is shown on the rear cover name plate on the set. Use the table below to confirm which features your particular Model is equipped with.
VIDEO OUT Connect an optional AUDIO/VIDEO cable from the VIDEO OUT jack on the rear of the VCR to the VIDEO IN jack on the rear of the TV. Connect another optional audio/video cable from the AUDIO OUT jacks on the rear of the VCR to the AUDIO IN jacks on the rear of the TV.
VCR to the S-VHS IN jack on the rear of the TV. Connect an optional AUDIO/VIDEO cable from the AUDIO OUT jacks on the rear of the VCR to the AUDIO IN jacks on the rear of the TV. Press the TV/VIDEO button to select “S-VIDEO”.
(AUX IN) AUDIO Connect an optional audio/video cable from the VIDEO OUT jack on the camcorder to the VIDEO IN jack on the front of the TV. Press the TV/VIDEO button to select “AV3”. ◆ As you press the button TV, AV1, AV2 (S-VIDEO) and AV3 are repeated alternately.
You can control the TV set remotely with this transmitter anywhere up to 7~10 meters away from the TV set with in the range of 60˚, right and left. ➣ It is possible that the transmitter range will be reduced if a bright light is turned on around the TV set. POWER...
Switching your Television On and Off The mains lead is attached to the rear of the television. Plug the mains lead into an appropriate wall socket. ◆ Use a wall socket with a: - Voltage of between 100 and 250 volts. - Frequency of either 50 or 60 Hz.
This Auto Store can memorise on-air channels from present channels in numerical order. If the TV is in stand-by mode (red light on), press the “POWER” button on the remote control. Press the “MENU” button and press CH ▲ or CH ▼ button to place on the “Setup”...
Page 15
Asia/W. Europe B/G,H: West European TV Standard CIS/E. Europe D/K: East European TV Standard China D/K: China TV Standard Hongkong/UK I: British TV Standard (UHF Only) Australia B/G,H: Australian TV Standard NZ/Indonesia B/G,H: W. European TV Standard (1-11) South Africa...
The number by which you wish to identify each stored channel. Method 1: To memorise channels by searching channels. Press the MENU button on the TV set. ◆ Move to “Setup” option by pressing CH▲ or CH▼ buttons and press the VOL+ or VOL–...
Page 17
Tuning Procedure (Manual store) Method 2 : To memorise channels by searching frequency. Press the MENU button on the TV set. ◆ Move to “Setup” option by pressing CH▲ or CH▼ buttons and press the VOL+ or VOL– buttons. Move to “Manual store” option by pressing CH▲ or CH▼ buttons and press the VOL+ or VOL–...
You can exclude the channels of your choice from the channel scan operation. When you scan through the stored channels, those you have chosen to skip are not displayed. Press the MENU button on the TV set. ◆ Move to “Setup” option by pressing CH▲ or CH▼ buttons and press the VOL+ or VOL–...
If however the signal is weak or distorted, you may have to fine- tune the channel manually. Press the MENU button on the TV set. ◆ Move to “Setup” option by pressing CH▲ or CH▼ buttons and press the VOL+ or VOL–...
Tuning Procedure (Sort) S.STD SURROUND S.MODE P.STD P.SIZE MENU MULTI ROTATE Menu Picture Sound Time Setup Function PinP Sel. Enter Setup Auto store Manual store Channel skip Fine tune Sort Sel. Enter * Sort * From : P 1 : P 3 Store : ? Sel.
Picture Adjustment By pressing the P.STD button, you can sequentially select any one of the five possible preferred analogue picture presets. Press the P.STD button. ◆ Whenever this button is pressed, the mode will be changed as follows. ➞ Custom ➞ Standard ➞ Dynamic ➞ Movie ➞ Mild Custom ◆...
Page 22
Each press of the “P.SIZE” button for change the picture size in status of “PIP ON”. ◆ When we watch the TV, pictures can be cut on is left or right or left & right side according to the signal from broadcasting station. Then we ought to watch on...
Sound Adjustment There is a choice of four audio settings. By pressing the S.STD button any one of the five settings can be in the sequence illustrated. Press the S.STD button. ◆ whenever this button is pressed, the mode will be changed as follows. ➞...
Picture Adjustment (Surround) -/-- S.STD SURROUND S.MODE P.STD P.SIZE MENU Stereo Mode Functions By pressing the S. MODE button, you can determine the way in which the audio signal is produced at the loudspeakers and AV output. Type Type of broadcast NICAM STEREO (OPTION)
Press the MENU button to return to the main menu. ➣ NOISE TIMER Mode If the set is not switched off when the TV station stops broadcasting, it will automatically go to Stand-by Mode after 15 minutes. This function will not operate when the Television set is in AV Mode or TELETEXT mode.
Setting the On/Off Timer S.STD SURROUND S.MODE P.STD P.SIZE MENU MULTI ROTATE Menu Picture Sound Time Setup Function PinP Sel. Enter Time Clock : 7 : 30 Timer : On On time : – – : – – Off time : – – : – – Sel.
Blue screen menu isn’t display when in AV mode. ◆ Low noise AMP To amplify not Noise but TV signal in the weak signal Area. ◆ This function is working only weak signal condition, and that is memorized on current program number, additionally.
Move to “Size” option by pressing the CH▲ or CH▼ buttons and press the VOL+ or VOL- buttons to adjust the type of Sub Picture. ◆ If you wish to choose this function, you must select a “TV” mode on the “ Sel.” option.
Page 29
Sub picture. ➣ When the Main picture is in the Video mode and the Sub picture is in the TV mode, you might not hear the sound of Main picture when pressing the SWAP button after changing the Sub picture channel.
When the “INDEX” button is pressed the current page changes to the first memorised page. ◆ While the search is in progress for a selected page, the normal TV picture can be viewed by pushing this button. When the page has been found, its number will be displayed in the left corner of the top line.
Page 31
◆ F/T/B button This function is used when the characters on the TV screen are hard to read. Pushing it the 1st time expands the TOP half of the display only. Pushing it the 2nd time expands the bottom half of the display only.
Page 32
Teletext Operation (Option) LIST/FLOF INDEX TV/TEXT CANCEL STORE SUBPAGE F/T/B HOLD REVEAL PAGE T e l e t e x t LIST mode GREEN To select a memory position, press one of the “colour-coded” buttons. Enter the page number of the desired teletext page by using buttons “0” to “9”.
Wipe the outside of this TV set with a soft, dry cloth. ◆ Do not use solutions containing benzol, petroleum or a chemical cloth. Wipe the speaker of this TV set with a soft cloth moistended with water. ◆ Not plugged into A.C. supply.
Specification AREA ASIA/ DISPLAY W.EUROPE E.EUROPE – – – – – – – – – – ➣ For cable channels in “America” area the actual channel may be different from that shown in the table. RECEIVE CHANNEL CIS/ AUSTR- CHINA HK/UK ALIA –...
Page 35
Specification (cont.) AREA ASIA/ CIS/ CHINA DISPLAY W.EUROPE E.EUROPE – – – – – – – – – – – – ➣ For cable channels in “America” area the actual channel may be different from that shown in the table. RECEIVE CHANNEL AUSTR- NZ/IN-...
Page 36
– AFTER SALES SERVICE – Do not hesitate to contact your retailer or service agent if a change in the performance of your product indicates that a fault condition may be present. ELECTRONICS AA68-11068A(3) ENG...