Selecting The Picture Size (Depending On The Model) - Samsung CS34A10 Owner's Instructions Manual

S58A_UK(02796A-01) 10/30/03
ENG
... ... More
Blue Screen
Tilt
Size
Move Enter
Wide CRT
Auto wide
Move Enter
...
Position
†
Auto wide
...
œ √
Adjust
†
...
œ √
Size
†
10:16 PM Page 28
Selecting the Picture Size
You can select the picture size which best corresponds to your
viewing requirements.
Picture
√ √
: Off
√ √
√ √
Return
Size
Wide Panorama
Return
...
Size
†
VGA mode
(Position adjustment)
VGA mode
(Size adjustment)
28
(depending on the model)
1
Press the MENU ( ) button.
Result: The options available in the Picture group are
displayed.
2
Press the ENTER ( ) button.
3 Press the † or ... button to select Size. Press the ENTER (
button.
Result: Depending on the model, the following modes are
available:
◆ Wide CRT:
Auto wide - Wide - Panorama - Zoom1 - Zoom2
- 4:3
➢
◆ You can control the vertical size and
◆ If the video signal lacks WSS signal in
◆ Normal (4:3) CRT:
Normal - Zoom1 - Zoom2 - Wide
Normal - 16:9 (In the DTV mode)
➢
◆ You can select these options by simply pressing the
P.SIZE ( ) button on the remote control. At this time,
lifting is available in the Zoom1 or Zoom2 mode by
pressing the † or ... button.
◆ If the PC is connected, you can adjust the VGA mode
by using the œ, √, †, or ... button.
Press the œ or √ button to change the setting. When you are
4
satisfied with the setting, press the ENTER (
➢
You can shift the screen to your required position in the
VGA mode by pressing the P.SIZE(
use the œ, √, †, or ... button. To adjust the screen size,
press the P.SIZE(
†, or ... button.
position of the screen by using the † or
... button in Auto wide mode when
the vertical size is changed
automatically by Auto wide mode.
Auto wide mode, the system will
automatically increase the vertical size.
In this case, Subtitle on/off action there
may be flickering. If you want to disable,
change the picture size to another
mode.
) button to store.
) button followed
) button again followed use the œ, √,
)