Intel D50DNP Series Integration And Service Manual page 218

Appendix G. Product Safety – Multi-Language
WARNING: English (US)
The power supply in this product contains no user-serviceable parts. There may be more
than one supply in this product. Refer servicing only to qualified personnel.
Do not attempt to modify or use the supplied AC power cord if it is not the exact type
required. A product with more than one power supply will have a separate AC power cord
for each supply.
The power button on the system does not turn off system AC power. To remove AC
power from the system, you must unplug each AC power cord from the electrical outlet
or power supply.
The power cord is considered the disconnect device to the main (AC) power. The socket
outlet that the system is pluged into, shall be installed near the equipment and shall be
easily accessible.
SAFETY STEPS: Whenever you remove the chassis covers to access the inside of the
system, follow these steps:
1. Turn off all peripheral devices connected to the system.
2. Turn off the system by pressing the power button.
3. Unplug all AC power cords from the system or from electrical outlets.
4. Label and disconnect all cables connected to I/O connectors or ports on the back of
5. Provide some electrostatic discharge (ESD) protection by wearing an antistatic wrist
6. Do not operate the system with the chassis covers removed.
After you have completed the six SAFETY steps above, you can remove the system
covers. To do this:
1. Unlock and remove the padlock from the back of the system if a padlock has been
2. Remove and save all screws from the covers.
3. Remove the covers.
218
Intel® Server D50DNP Family Integration and Service Guide
the system.
strap attached to chassis ground of the system—any unpainted metal surface—when
handling components.
installed.