Fisher & Paykel DISHDRAWER DD24DT2NX9 User Manual page 38

Hide thumbs Also See for DISHDRAWER DD24DT2NX9:
Table of Contents

Advertisement

Available languages

Available languages

PROBLEM
Foaming
Water leaking
Drawer will not
open (no tones
or wash in
progress)
Power failure
during wash
program
Continuous
beeping with
A
F
/
code
in display
Intermittent
beeping
38
TROUBLESHOOTING
POSSIBLE CAUSES
Incorrect detergent use.
Egg left on plates.
Rinse aid setting
too high.
Rinse aid dispenser plug
not closed properly.
Drain hose
disconnected from
waste pipe.
Water inlet hose not
connected correctly.
Other leaks.
Rinse aid dispenser plug
not closed properly.
is on.
CHILDLOCK
Closed drawer auto lock
is on.
Power outage in your
home or area.
A fault has occurred.
DishDrawer™
Dishwasher is paused.
WHAT TO DO
Refer to 'Detergent'.
Rinse excess egg prior to loading.
Decrease the rinse aid setting.
Ensure the plug is closed tight with the hand
grip in a vertical position. Refer to 'Rinse aid'.
Reconnect the drain hose to the waste pipe.
Ensure the inlet hose is connected securely.
Turn water and power supplies to the
DishDrawer™ Dishwasher off. Call Customer
Care or your Authorised Service Centre.
Ensure the plug is closed tight with the hand
grip in a vertical position. Refer to 'Rinse aid'.
Turn
off. Refer to
CHILDLOCK
'Keylock & Childlock'.
Press any button and open drawer within
30 seconds.
Wait until power resumes, program will restart
in same part of wash program.
Refer to 'Fault codes'.
Close the drawer and press
program.
to resume the

Advertisement

Table of Contents
loading

Table of Contents