Table of Contents
Advertisement
Both configurations have a video con-
nector (sometimes called a video port).
If you are not sure which connector is
the video connector, consult your com-
puter or display adapter manual.
4. Connect one end of the power cord to
the monitor and the other end to the
power outlet.
5. Turn on the monitor and the computer.
Before turning on power to the
monitor and computer : Check the
User's Manual of your computer for
instructions about turning on equip-
ment connected to the computer. Also,
check for any instructions concerning
your video system when using a multi-
sync monitor. In some cases, jumper
or switch settings may be required for
the display adapter to output extended
resolution modes.
To turn on monitor: Use the power
switch on the monitor's front panel.
The LED indicator should glow green
( see Basic Controls and LED Indicator
Functions, page 9 ).
Connection to Your Computer-
Macintosh Computer
This monitor requires a cable adapter
for use with a Macintosh computer.
The MacMaster Cable Adapter sup-
ports all monitors and all Macintosh,
Centris, Quadra, Duo Dock, and Power
Macintosh computers. If you do not
already have a cable adapter, check
with your computer dealer.
Refer to your computer and cable
adapter User's Manuals to help deter-
mine the appropriate display mode
and resolution. This monitor supports
resolutions up to 832 x 624 for the
Macintosh, the resolution most highly
recommended is 832 x 624.
Set the display mode and resolution
using the DIP switches on the cable
adapter.
I
Hide quick links:
Advertisement
Table of Contents
