his section of the User's Manual
explains how to connect the Color
Monitor to IBM or PC-compatible
computers, as well as Apple Macintosh
computers.
Connection to Your Computer—
IBM or PC-Compatible
Your Color Monitor complements a wide
range of IBM and PC-compatible systems.
To attach the monitor to this type of sys-
tem, follow these instructions:
1. Turn off the power to the monitor and
computer.
Signal Input
AC Cord Inlet
Connect one end of the signal cable
(provided with your monitor) to the D-
SUB connector on the rear of the mon-
itor. Tighten the screws on the signal
cable.
Connect the other end of the signal
cable to the video connector on your
computer's video controller. Tighten
the screws of the signal cable to
ensure proper connection.
Note: Your computer system has one of
two configurations:
The video controller is built into the
computer.
The video controller is in the form of a
display adapter ( also referred to as a
video card, graphics card, graphics
board, or graphics adapter ).