3. Connecting EXT.(SCART)
Connecting Your
Monitor
Installing the
Monitor Driver
Installing a VESA
base
1. Connect a video cable between the EXT jacks on the Monitor and the EXT jacks on the DVD
2. Select COMP using the Video button from the user control buttons.
4. Connecting to a Macintosh
Connect to the DVD Devices input if the device has a DVD connector.You can watch DVD simply by
hooking up the DVD with the monitor as long as the power is on.
Player.
1. Connect the power cord for your monitor to the power port on the back of the monitor.
Plug the power cord for the monitor into a nearby outlet.
2. Connect the signal cable to the D-SUB port on the Macintosh computer.
3. For older model Macintoshes, you need to adjust the resolution control DIP switch on the Macintosh
adapter (optional) referring to the switch configuration table shown on its rear.
4. Turn on the monitor and Macintosh.
English > Main > Setup > Connecting Your Monitor > Connecting to other devices